BMW 3 Series E & F Series 3-Way Component Speaker Upgrade Package

Package Content: MTX TX6.BMW JL Audio XD400/4 Audio Control LC2i 8 Gauge Wiring Kit 20m x 16 Gauge Speaker Cable TX6.BMW Specifications: RMS Power : 150W Max Power : 450W Impedance : 4Ω Frequency response : 23Hz – 25kHz Sensitivity : 93,5 dB/2,83v/1m Tweeter diameter : 25mm (1”) Midrange diameter : 10cm (4″) Woofer diameter : 20cm (8″) XD400/4 Specifications: Rated Continuous (RMS) Power @ 14.4 V @ 4 Ω 75 W RMS x 4 @ 2 Ω 100 W RMS x 4 Bridged @ 4Ω 200 W RMS x 2 Rated Continuous (RMS) Power @ 12.5 V @ 4 Ω 60 W RMS x 4 @ 2 Ω 90 W RMS x 4 Bridged @ 4Ω 180 W RMS x 2 General Specifications Frequency Response 12 Hz – 22 kHz ( 0, -1dB) S/N Ratio, referred to highest rated power >104 dB below rated power (A-weighted, 20 Hz – 20 kHz noise bandwidth) S/N Ratio, referred to 1 W >84 dB (A-weighted, 20 Hz – 20 kHz noise bandwidth) Damping Factor @ 4 Ω >150 / 50 Hz Damping Factor @ 2 Ω >75 / 50 Hz THD N @ Rated Power <1% @ 2 Ω per Ch. Input Voltage Range @ RCA Inputs Switchable from 200 mV – 2 V RMS (Low) to 800 mV – 8 V RMS (High) Min.Copper Power / Ground Wire Gauge 4 AWG wire Fuse Rating 40 A (AFS, AGU or MaxiFuse™) LC2i Specifications: Maximum Speaker Level Input: 400 watts per channel @ 4 ohms Maximum Preamp Output: 9.5Vrms/13V peak Optional Dash Level Control Remote: 0dB/-19dB Frequency Response: 10Hz-100kHz; /-1dB THD: 0.01% Signal-to-Noise Ratio: >110dB Input Impedance: 20k ohms Output Impedance: 150 ohms Power Draw: 150 mA Recommended Fuse Rating: 1 Amp Dimensions: 6.5″ (w) x 1.5″ (h) x 3.25″ (d) Weight: 1 lb